Rivet Nut Tool (M)



Tool Only Rivet M

available in 4, 5, and 6MM for metric sizes mention metric version in the comment box at the end of order form.

Installation Procedure

Completely retract the slide and install rivet nut finger tight on the stud. Place the stabilizing rod in the provided hole. Insert rivet nut into the drilled hole and tighten the slide screw to draw the slide up the ramp. A light coating of grease on the ramp and a drop of oil on the tightening screw will ease the operation of the tool. Typically, the slide will be 0” to ¼” closed, depending on the thickness of material, when using ¼-20 rivet nuts. This will set the rivet nut. [When using the 10-32, test to see how far to draw the slide up the ramp. Usually 1/8” to 3/8” gap.] Additional rivet nuts are available from your distributor or call 570-587-5934.

TIP: To expedite operation of the tool use a 7/16″ socket with a variable speed drill.

This procedure sets the rivet nut in place providing an anchor point where you cannot normally install a regular nut and bolt.

First time, pays for itself!

U.S. Patent Number 6691546

Advantages of a rivet nut:

Attaches any object to sheet metal
Holding Power
Uses standard rivet nuts
Works when nothing else will
Use instead of sheet metal screws
Goes where a machine screw won’t
Easy to follow instructions
Everything you need included with our kit


The Rivet Nut Tool can be used in many different ways.  A Rivet Nut Tool can also be called, Rivet Guns, Rivet Tools, Rivet Pop Guns, Rivet Pneumatic Guns, Rivet Air Guns, Rivet Pop Tools and much more.

Cars Tools
Automobile Tools
Truck Tools
Boat Tools
RV Tools
Farm Equipment Tools
Work Shop Tools
House Hold Tools
Machine Tools
And much, much more!


There are no reviews yet.

Be the first to review “Rivet Nut Tool (M)”

Your email address will not be published. Required fields are marked *